If you are looking for a reliable and trustworthy brand for your golf cart accessories, then you have come to the right store. Huskey is renowned and well known for its high-quality, long lasting and durable golf cart accessories. Your club car DS shock absorbers are critical to the stability, and comfort of your vehicle. Worn out or damaged components can make it hard to steer and rough going over bumps. If you notice a stiffer ride or squeaking when you get in and out of your vehicle, it may be time to replace your golf carts shock absorbers. Shock Absorber Length Measure: Front Shock Absorbers: • Inner Eye Diameter: 5/16” Inch • Extended Shock Length: 14 ½” Inch • Inner Eye to Eye Length: 7 7/8” Inch • Compressed shock length: 9” Inch Rear Shock Absorbers: • Extended Shock Length:14 ½” Inch • Compressed shock length: 11 ¾” Inch How to install our shock absorbers on an Club Car DS golf cart? 1. Front Shock Absorbers: Tools Required: (1) ¾” socket (2) 13mm wrench (3) 10mm socket (4) Impact driver (5) Floor jack (6) Jack stands Procedure: 1.Loose the lug nuts, jack the cart up and remove the tire 2.Now remove the bottom bolt of the shock absorber 3.Remove the top bolt 4.Now place new shocks and repeat all the steps 2. Rear Shock Absorbers: Tools Required: (1) 9/16” Wrench (2) 17mm Wrench (3) ¾” socket (4) Impact Driver (5) Floor Jack (6) Jack Stands Procedure: 1.Loose the lug nuts, jack the cart up and remove the tire (place the jack in the middle of frame to support the golf cart evenly) 2.Loose the nuts on the bottom of the shock using 9/16” wrench. 3.Reaching through inspection panel, remove the top bolt of the shock 4.Now remove nut, washer and rubber bushing off the new shock 5.Now place it into the bottom side and place the rubber bushing, washer and nut back. 6.Now repeat the process for top side of shock using 17mm wrench 7.New shock has been installed 8.Place tire, jack down the cart and tighten all the lug nuts.