PACKAGE INCLUDES: 20 anodized aluminium washers 20 stainless steel countersunk hex head bolts 20 stainless steel washers 20 stainless steel nylock style nuts This hardware can be used to replace your existing plastic push rivets or can be used in your initial install. A quick and easy way to add a little customization to your cart. They are available in Red,Blue,Black and Silver INSTRUCTIONS FOR INSTALLATION: Test fit fender flare to bodywork to determine best placement. Keep in mind our flares have notches in them to accommodate for the rocker panels and the contour of the body. Holding the fender flare in place, mark locations to be drilled using a marker. For Stainless Steel hardware, Drill first hole using a ¼ ” drill bit. Ensure area behind body work is clear. For Self Tapping Screws, Drill a pilot hole using a 1/8” drill bit. Ensure area behind body work is clear. Install the first fastener to secure fender flare. Check other marked holes to ensure proper placement before drilling. Once sure of placement, remove fender flare out drill other holes Install the mounting hardware and repeat the process on the other three fender flares. NOTE: WE OFFER TWO DIFFERENT TYPES OF MOUNTING HARDWARE. PLEASE NOTE THERE ARE DIFFERENCES IN HOW THEY ARE INSTALLED. Each Flare is marked relative to where it is to be mounted. This can be found on the inside of the fender flare We gladly accept returns of our products, If you changed your mind or ordered the wrong part, as long as it is unused and in the original packaging all we ask is that you cover the cost of shipping.